品牌:美孚
起订:1桶
供应:1000桶
发货:1天内
1、CKB抗氧防锈型齿轮油
普通工业齿轮油，由精致矿物油加入抗氧、防锈添加剂调配而成，有严格的抗氧、防锈、抗泡、抗乳化性能要求，适用于一般轻载荷的齿轮润滑。相对应的国外标准为AGMA R和O型；
2、CKD极压型齿轮油
重载荷工业齿轮油，由精致矿物油加入抗氧、防锈、极压抗磨剂调配而成，比CKC具有更好的抗磨性和热氧化安定性，适用于高温下操作的重载荷的齿轮润滑。相对应的国外标准为AGMA250.04EP和美钢224；
3、CKC极压型齿轮油
中载荷工业齿轮油，由精制矿物油加入抗氧、防锈、极压抗磨剂调配而成，比CKB具有较好的抗磨性，适用于中等载荷的齿轮润滑。相对应的国外标准为AGMA 250.03EP；
4、CKE蜗轮蜗杆齿轮油
涡轮涡杆油，由精制矿物油或合成烃加入油性剂等调配而成，具有良好的润滑特性和抗氧、防锈性能，适用于蜗轮蜗杆齿轮之润滑。相对应的国外标准为AGMA中 250.03的COMP油；
5、CKS合成烃油
合成烃油齿轮油。由合成油或半合成油为基础油加入各种像配伍的添加剂，适用于低温、高温或温度变化大，耐化学品以及其它特殊场合的齿轮传动润滑。
6、CKT合成烃极压型齿轮油
低温中载荷工业齿轮油。由合成烃成为基础油，加入同CKC相似的添加剂，性能除具有CKC特性外，有更好的低温、高温性能，适用于在高、低温环境下的中载荷齿轮之润滑。相对应的国外标准为AGMA 250.03合成烃油；
7、CKH：普通开式齿轮油
由精制润滑油加抗氧防锈 剂调制而成，具有较好的抗氧、防锈性和一定的抗磨性。适用于一般载荷的开式齿轮和半封闭式齿轮润滑。
8、CKM：溶剂稀释型开式齿轮油
由高粘度的普通开式或极压开式齿轮油加入挥发性溶剂调制而成，当溶剂挥发后，齿面上形成一层油膜，该油膜具有一定的极压性能。溶剂挥发后的油膜强度Timken OK值不小于200N，或FZG齿轮试验通过九级以上。
9、CKJ：极压开式齿轮油
由精制润滑油加入多种添加剂调制而成，它比CKH或FZG油具有更好的极压性能。适用于苛刻条件下的开式或半封闭式的齿轮箱润滑。Timken OK值不小于200N，或FZG齿轮试验通过九级以上。
Mobil SHC™ 600 Series
Mobil Industrial, Philippines
Product Description
Mobil SHC™ 600 Series lubricants are exceptional performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation helping to enable increased customer productivity. These scientifically engineered oils are formulated using the latest proprietary and patent pending Mobil SHC technology to provide outstanding and balanced performance in demanding applications at high and low temperatures. Mobil SHC 600 products feature excellent low temperature properties, as well as improved air release performance in the lower viscosity grades. These products are resistant to mechanical shear, even in heavily loaded gear and high shear bearing applications, so that there is virtually no loss of viscosity.
Mobil SHC 600 Series products have low traction coefficients relative to mineral oils which derive from the molecular structure of the base stocks used. This results in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling contact bearings. Low fluid friction produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. Mobil SHC 600 Series products have demonstrated up to 3.6% improvement in energy efficiency in controlled laboratory testing(*). Mobil SHC 600 Series formulation also provides excellent resistance to oxidation and deposit formation at elevated temperatures, as well as exceptional resistance to rusting and corrosion, antiwear, demulsibility, foam control and air release properties, and multi-metal compatibility. Mobil SHC 600 Series oils maintain good compatibility with seals and other materials used in equipment normally lubricated with mineral oils.
Mobil SHC 600 Series lubricants are suitable for use in a wide range of equipment, not only as high temperature problem solvers, but also because of the other benefits they offer.
(*) Energy efficiency relates solely to the performance of Mobil SHC 600 when compared to conventional (mineral) reference oils of the same viscosity grade in circulating and gear applications. The technology used allows up to 3.6% efficiency compared to the reference when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions and application.
Features and Benefits
The Mobil SHC brand of lubricants are recognized and appreciated around the world for their innovation and outstanding performance. These synthetic products, molecularly designed and pioneered by our research scientists, embody the continuing commitment to using advanced technology to provide outstanding lubricant products. The development of Mobil SHC 600 Series was preceded by close contacts between our scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.
Our work with key equipment builders has helped confirm the results from our own laboratory and rig tests showing the exceptional performance of Mobil SHC 600 Series lubricants. Not least among the benefits, shown in work with OEMs, is the potential for energy efficiency improvements up to 3.6% relative to mineral oils (*). These benefits are particularly evident in equipment with a high level of mechanical losses, such as high ratio worm gears.
To develop the latest Mobil SHC technology for Mobil SHC 600 Series oils, our product formulation scientists chose select base oils because of their exceptional thermal/oxidative resistance potential and combined them with a balanced additive system, which complements the inherent benefits of the base oils to provide excellent oil life, deposit control and resistance to thermal/oxidative and chemical degradation. This formulation approach provides low temperature fluidity characteristics exceeding that of many conventional mineral products and is a key benefit for remote, low ambient temperature applications. Mobil SHC 600 Series oils offer the following features and potential benefits: